Few people know this way to fix a broken electrical plug! — Page 2

Disconnect the power :
- Before handling the plug, make sure to disconnect the electricity from the main panel to avoid the risk of electrocution.
Remove the damaged plug:
- Using a utility knife, carefully remove the plug cover.
- Inspect the wiring to check for any frayed or damaged wires.
Check and prepare the cables:
- If the cables are in bad condition, cut off the damaged part and strip a new section of the cable with the cutter.
- Use the lighter to gently heat the tip of the stripped wire to make it easier to handle.
- Solder the ends of the stripped wire together to ensure a firmer and more stable connection.
Reassemble the plug:
- Place the cables back into the plug, making sure each one is in its correct position.
- Use glue to secure the plug parts and prevent unnecessary movement.
- Secure the insulation of the cables with insulating tape to prevent short circuits.
Test the plug:
- Once assembled, restore power and test the plug with a device to ensure it is working properly.